Manufacturers

DM-9030 Automotive Meter

DM-9030 Automotive Meter


$84.95

4 other products in the same category:

* 3½ Digit, 0.5% basic accuracy
* 12 Functions, 36 Ranges
* Tachometer 500-10,000 RPM
* Dwell Angle 3, 4, 5, 6, 8 cylinders
* Duty Cycle 0.1-100.0%
* Frequency 0.1Hz-20kHz
* Temperature 0˚ -1400˚F, -20˚ -750˚C
* Used with current and other adapters

This is a very versatile automotive meter and can be used for many different diagnostic work on cars and trucks. When used with the inductive pick up IP-08 or the photo tacho adapter TA-601 it can check engine RPM. It can also measure the percentage duty cycle for fuel injection while high resolution frequency counter can read the output from MAF sensor. Temperature measurements can be taken using different type K probes. When used with the DC/AC current probe CA-1000D it can measure current from battery and alternator up to 1000 Amp. Light adapter LX-02 can be used to check light intensity and anemometer adapter AM 402 can be used to check the wind speed. It is a perfect tool for auto mechanics.

DCV 200.0mV, 2V, 20V, 200V, 1000V
ACV 200.0mV, 2V, 20V, 200V, 750V
DCA / ACA 10.00A
Resistance 200.0Ω, 2k, 20k, 200k, 2000k, 20MΩ
Tachometer 500-10,000RPM; 10RPM resolution
Dwell Angle 3, 4, 5, 6 & 8 cylinder engines; 0.1˚ resolution
Duty Cycle 0-100.0%
Frequency 200.0 Hz, 2k, 20kHz
Temperature -20˚ to 750˚C, 0˚ to 1400˚F
Diode Check Yes
Continuity Beeper Yes
Input Impedance 10MΩ
Compatible With
IP-07 Inductive Pickup
CA-1000D DC/AC Current adapter up to 1000 amps
TP-KO1 Bead Probe to check air temperature, heating, air conditioning
TP-KO2 Immersion Probe to check exhaust and coolant temperature
TP-KO3 Surface Probe to check engine head, brake and tire temperature
LX-02 Light adapter to check high/low beam
AM-402 Anemometer adapter to check wind speed

No customer comments for the moment.

Only registered users can post a new comment.