Manufacturers

GSP-810PM 1GHz Spectrum Analyzer w/ Power Meter

GSP-810PM 1GHz Spectrum Analyzer w/ Power Meter

* Remote Control Software (Optional $172)

* Fully Digital Phase Locked Loop Technique Design
* High Resolution of Span to Measure the more detailed signal: Zero, 2kHz ~ 100MHz /DIV
* High Input Protection Level: +30dBm, ±25VDC
* Reference Level Range: -30dBm ~ +20dBm
* Good Noise Floor Performance
* Spurious Noise: < -60dB
* Intermodulation (3rd): < -70dBc
* Two Markers for Absolute and Relative Measurement
* Functions: Max. Hold, Average (2 ~ 32 traces), Freeze, Peak Search, Marker to Center Function
* 9 Memories of Save/Recall
* RS-232 Interface and Display Software to get Trace from GSP-810 to PC

More details


$2,650.50

3 other products in the same category:


Frequency
Frequency Range 150kHz ~ 1000MHz
Frequency Resolution 1kHz C.F. entry, 40Hz Sweep resolution at 2kHz/DIV
Frequency Display 6 1/2 digit setting
Frequency Control Digital phase locked
Frequency Stability ±2ppm/year aging,±10ppm, 0 to 50°C
Frequency Spans Zero, 2kHz to 100MHz/DIV, in a 1-2-5 sequence
Bandwidth
Resolution Bandwidths 3kHz, 30kHz, 220kHz, 4MHz
Resolution BW Accuracy 15%
Video Bandwidth 1.6kHz/90kHz coupled with RBW
Amplitude
Reference Level Range -30dBm to +20dBm
Reference Level Accuracy ±1dB at 80MHz
Input Level Range -100dBm to +20dBm
Noise Floor -95dBm@30kHz RBW, -100dBm typical/-75dBm:150kHz ~ 10MHz
Amplitude Display Range 75dB
Amplitude Accuracy ±1.5dB typical@0dBm, 80MHz
Amplitude Level Linearity ±1.5dB over 70dB
Ref. Level Freq. Flatness ±1.5dB over 100MHz, ±2.5dB typical over entire band/±3dB:150kHz ~10MHz
Harmonic Spur Response  
Non-Harmonic Spur Response  
Intermodulation(3rd)  
Phase Noise -77dBc/Hz at 1GHz, 30kHz offset
Input
Input Overload Protection +30dBm continuous, ±25VDC
Impedance 50 ohm nominal
Return Loss  
Input Attenuation 50dB to 0dB in 10 dB steps coupled to reference level
Connector Type N female
Marker
Number of Markers 2
Marker Resolution 0.1dB, 1kHz
Marker Mode Absolute, Relative, PK -> Marker, Marker -> Center
Marker Accuracy 0.1dB±amplitude accuracy
Functions
Memory 9 memories of save/recall
Trace Max. Hold, Average(2 ~ 32 traces), Freeze(Hold)
Setup Access parameters
FM/AM Demodulator
WB FM 120kHz deviation
MB FM 75kHz deviation
NB FM 30kHz deviation
AM Outputs Internal speaker, 3.5mm stereo jack, wired for mono operation
Remote Display Software & RS-232
Connecting to PC and getting trace from GSP-810, software will be downloaded from here
General
Power Source 100/120/220/230V AC±10%, 50/60Hz
Accessory Instruction Manual
Dimensions 12.20"W X 5.91"H X 17.91"D
Weight 18.74 lbs
Power Meter
Frequency Range 10MHz to 2GHz, usable to 2.7GHz
Power Level Range -20dBm to +23dBm, usable to +30dBm
Power Level Overload +40dBm
Return Loss  
Readout Resolution 0.2mW, 100mW scale, 2µW, 1mW scale; 0.1dB, Log scale
Accuracy ±(10% rdg ±1digit)
Readout mW or dBm

GSP-810 Spectrum Analyzer Comparison Page

No customer comments for the moment.

Only registered users can post a new comment.