GPS-3030D 30V, 3A DC Power Supply

GPS-3030D 30V, 3A DC Power Supply

* Light and Compact Design

* 0.01% High Regulation
* Internal Select for Continuous or Dynamic Load
* Series or Parallel Operation Function
* Remote Control by External Voltage
* Low Ripple and Noise
* Overload and Reverse Polarity Protection

Compact and popular series. Has remote control connector and switch on the real panel and can be connected in series or parallel with each other to provide higher voltage, higher current and higher power output. Ideal for laboratory and education.

More details


11 other products in the same category:

Voltage Range

0 - 30V

Current Range

0 - 3A

Display Digital X 1

5.0"W X 5.7"H X 11.2"D


11 lbs.

Constant Voltage Mode Output voltage Continuously variable, coarse and fine control
Line regulation ≤0.01% + 3mV
Load regulation ≤0.01% + 3mV (rating current ≤3A)
≤0.02% + 5mV (rating current >3A)
Ripple & Noise ≤0.5mVrms 5Hz - 1MHz (rating current ≤3A)
≤1mVrms 5Hz - 1MHz (rating current >3A)
Recovery time ≤100µS (50% Load change, Minimum load 0.5A)
Temp. Coefficient ≤300ppm/°C
Constant Current Mode Output current Continuously variable, coarse and fine control (Hi / Lo range switchable)
Line regulation ≤0.2% + 3mA
Load regulation ≤0.2% + 3mA
Ripple Current ≤3mArms
Meter Analog V-meter and I-meter each one
2.5 class
Dimension 2.0" X 2.0"
Digital 3½ digits 0.5" LED display
3½ digits 0.39" LED display (for GPS-3030DD)
Accuracy: ±(0.5% + 2 digits)
Insulation Chassis and terminal ≥20MΩ (500 VDC)
Chassis and AC cord ≥30MΩ (500 VDC)
Power Source AC 100, 120, 220, 240V±10%, 50/60Hz external switchable
Accessories Test lead GTL-105(≤3A) or GTL-104(≤10A), power cord, manual

GPS-Series Comparison Page

No customer comments for the moment.

Only registered users can post a new comment.