GOS-620FG 20MHz Oscilloscope w/ Function Generator

GOS-620FG 20MHz Oscilloscope w/ Function Generator

* Economic Choice for High Quality

* Built-in 1MHz Function Generator
* 20 MHz, Dual Channel
* High sensitivity 1 mV/DIV
* TV synchronization
* ALT triggering Function
* Z-axis input
* CH1 output
* Two years factory warranty

More details


8 other products in the same category:

CRT Type 6-inch rectangular type with internal graticule 8 x 10 DIV (1 DIV=1 cm)
Z - Axis Input Sensitivity: Above 5Vp-p
Max Input Voltage: 30V (DC+AC peak)
Bandwidth: DC - 2MHz
Phosphor P31
Accelerating Potential 2 kV
Polarity Positive-going input decrease
Focus Control Auto focus
Function Generator Frequency Range 0.1Hz - 1MHz (7 range)
Waveform Sine Wave, Square Wave, Triangle Wave
Frequency Variable Range 10:1 or more
Output Impedance 50Ω±10%
Voltage Over 14Vpp (open circuit) continuous conversion
DC offset possible over ±6V when open
Sinewave Distortion 2% Max. (10Hz - 100kHz)
Squarewave Asymmetry ±3% or less (in 1kHz maximum)
Squarewave Rise/Fall Time 50Ω output:120nS or less
Vertical System Sensitivity 5mV - 5V/DIV ± 3%, 1mV - 1V/DIV±5% (using X 5MAG)
Bandwidth DC to 20MHz (X 5MAG:DC to 7MHz)
Rise Time 17.5nS (50nS at X 5MAG)
Max Input 300V (DC+AC peak) at 1kHz
Input Impedance Approx. 1MΩ / 25pF
Input Coupling AC, DC, GND
Vertical Mode CH1, CH2, DUAL (ALT/CHOP), ADD, CH2 INV
Horizontal System Sweep Time 0.2µS / DIV - 0.5S / DIV±3%, (±5% at X 10MAG)
Max Sweep Rate 100nS / DIV (20nS and 50nS / DIV are uncalibrated)
Trigger Trigger Mode AUTO, NORM, TV-V, TV-H
Trigger Source CH1, CH2, ALT, LINE, EXT
Trigger Slope "+" or "-"
X - Y Operation Sensitivity 5mV - 5V / DIV±4%
X-axis Bandwidth DC - 500kHz
Phase Error 3º or less from DC - 50kHz
Output Signal Trigger Signal Output Voltage: 20mV/DIV into 50Ω
Bandwidth: 50Hz to 5MHz (-3dB)
Impedance: 50Ω
Calibrator Output 1kHz Squarewave, 2Vpp±2%
Power Source AC 115V/230V ± 10%, 50/60Hz
Accessories Power cord, manual, probes(10:1/1:1) X 2
Size 12.2"(W) X 5.9"(H) X 17.9"(D)
Weight 18.7 lbs.

No customer comments for the moment.

Only registered users can post a new comment.