These power
supplies are equipped with heavy-duty transformer to provide continuous
usage without over-heating. They can be set at constant voltage mode or
constant current mode with excellent regulation and low ripple for the
experiment. The output will be limited to the pre-set voltage or current
whichever is reached first so that the device connected to the power
supply is protected from excessive voltage or current. Both "+"
and "-" outputs are floating and either one can be grounded or
connected to another power supply in serial to provide higher voltage. The
voltage is controlled by both coarse and fine knobs for fine-tuning.
| Specifications |
PS-303 |
PS-305 |
PS-8110 |
PS-8112 |
PS-1610 |
PS-8107 |
| Price |
$159.00 |
$219.95 |
$289.95 |
$399.95 |
$289.00 |
$399.95 |
| Voltage
Range |
0 - 30V |
0 - 60V |
0 - 16V |
0 - 30V |
| Current
Range |
0 - 3A |
0
- 5A |
0 - 3A |
0 - 5A |
0 - 10A |
| Constant Voltage Mode
|
| Voltage Control
|
0V to ± rated voltage, coarse and fine control, continuously variable |
Load Regulation
1% to 100% Load
|
0.25% + 3mV |
Line Regulation
± 10 % input variation
|
0.25% + 3mV |
| Noise and
Ripple |
≤2mV p-p,
≤1mV rms 2mV p-p, ≤1mV rms |
| Constant
Current Mode
|
| Current Control
|
5% to 100% rated current, Hi - Lo two ranges
continuously variable |
| Load
Regulation |
≤0.2% + 3mA
0.2% + 3mA |
| Line
Regulation |
≤0.2% + 3mA
0.2% + 3mA |
| Noise and
Ripple |
<3mA
rms |
| Metering
|
| Voltmeter
|
0-30V |
0-60V |
Expanded 18V
|
0-30V |
| Accuracy |
2.5%
of full scale |
|
|
0 - 0.6A
0 - 3A |
0 - 3A
0 - 5A |
0 - 0.6A
0 - 3A |
0 - 3A
0 - 5A |
0 - 2.4A
0 - 12A |
0 - 0.6A
0 - 3A |
|
|
2.5% |
2.5%
3% |
2.5% |
2.5%
3% |
2.5% |
| Protection |
Electronic
protection against reverse polarity, over-voltage and short circuit. Fused primary
protection |
| Power |
120V/240VAC±10%, 50/60Hz |
| Dimension |
8.5" X 10.2"
X 6.2" |
8.5" X 12"
X 6.2" |
| Weight |
10.5 lbs. |
14.4
lbs. |
17.5 lbs. |
24 lbs. |
25.4 lbs. |
|