| CRT |
Type |
6-inch rectangular type with
internal graticule
0%, 10%, 90% and 100% markers. 8 X 10 DIV (1 DIV=1 cm) |
| Z - Axis Input |
Input Impedance: 5kΩ
Sensitivity: Above 3Vp-p
Bandwidth: DC - 5MHz |
| Phosphor |
P31 |
| Accelerating
Potential |
12 kV |
| Illumination |
Continuously adjustable |
| Vertical
System |
Sensitivity |
5mV - 5V/DIV ± 3%, 1mV - 2mV /
DIV±5% |
| Bandwidth |
DC - 50MHz
DC - 15MHz at 1mV - 2mV / DIV |
| Rise Time |
7nS (23.3nS at 1mV - 2mV / DIV) |
| Input Impedance |
Approx. 1MΩ |
| Input Coupling |
AC, DC, GND |
| Vertical Mode |
CH1, CH2, DUAL, ADD, CH2 INV (Dual
automatic switching ALT and CHOP) |
| Signal Delay |
Leading edge can be monitored |
| Horizontal
System |
A (Main) Sweep Time |
0.1µS - 0.5S/DIV ± 3%
100nS - 50mS/DIV ± 5% (X 10MAG)
10nS - 50nS ± 8% (x 10MAG) |
| B (Delay) Sweep Time |
0.1µS - 0.5mS / DIV ± 3%
100nS - 50µS / DIV ± 5% (X 10MAG)
10nS - 50nS / DIV ± 8% (X 10MAG) |
| Delay Time |
1µS - 5mS, ±5% |
| Delay Time
Jitter |
Better than 1:10000 |
| Trigger |
Trigger Mode |
AUTO, NORM, SINGLE |
| Trigger Source |
CH1, CH2, ALT, LINE, EXT |
| Trigger Coupling |
AC, DC, HF, REJ, TV |
| Trigger Slope |
"+" or "-" |
| X -
Y Operation |
Sensitivity |
5mV - 5V / DIV±4% |
| X-axis Bandwidth |
DC - 2MHz |
| Phase Error |
3º or less from DC - 100kHz |
| Output
Signal |
Trigger Signal
Output |
Voltage: 50mV/DIV into 50Ω |
| Calibrator
Output |
1kHz Squarewave, 2Vpp±2% |
| Power Source |
AC 100V / 120V / 220V /
230V ± 10%, 50 / 60Hz |
| Accessories |
Power cord, manual,
probes(10:1/1:1) X 2 |
| Size |
12.2"(W) X
5.9"(H) X 17.9"(D) |
| Weight |
18.1 lbs. |
|