 |
GOS-635G 35 MHz Dual Trace |
$445.00
* High sensitivity 1mV/DIV
* TV Synchronization
* Z axis input
* ALT Triggering Function
* Hold Off Function
* CH1 output
* Two years factory warranty
This scope is ideal for most service benches for quick waveform check. The extensive triggering control permits stable display of many complex waveforms.
| CRT | Type | 6-inch rectangular type with internal graticule 8 x 10 DIV (1 DIV=1 cm) |
| Z - Axis Input | Input Impedance: 5kΩ Sensitivity: Above 3Vp-p Bandwidth: DC - 5MHz |
|
| Vertical System | Sensitivity | 5mV - 5V/DIV ± 3%, 1mV - 2mV / DIV±5% |
| Bandwidth | DC - 35MHz DC - 10MHz at 1mV - 2mV / DIV |
|
| Rise Time | 10nS (35nS at 1mV - 2mV / DIV) | |
| Input Impedance | Approx. 1MΩ | |
| Input Coupling | AC, DC, GND | |
| Vertical Mode | CH1, CH2, DUAL, ADD, CH2 INV (Dual automatic switching ALT and CHOP) | |
| Horizontal System | Sweep Time | 0.1µS - 0.5S/DIV ± 3% 100nS - 50mS/DIV ± 5% (X 10MAG) 10nS - 50nS ± 8% (x 10MAG) |
| Trigger | Trigger Mode | AUTO, NORM |
| Trigger Source | CH1, CH2, ALT, LINE, EXT | |
| Trigger Coupling | AC, DC, HF, REJ, TV | |
| Trigger Slope | "+" or "-" | |
| X - Y Operation | Sensitivity | 5mV - 5V / DIV±4% |
| X-axis Bandwidth | DC - 1MHz | |
| Phase Error | 3º or less from DC - 50kHz | |
| Output Signal | Trigger Signal Output | Voltage: 50mV/DIV into 50Ω |
| Calibrator Output | 1kHz Squarewave, 2Vpp±2% | |
| Power Source | AC 100V / 120V / 220V / 230V ± 10%, 50 / 60Hz | |
| Accessories | Power cord, manual, probes(10:1/1:1) X 2 | |
| Size | 12.2"(W) X 5.9"(H) X 17.9"(D) | |
| Weight | 18.1 lbs. | |