| CRT |
Type |
6-inch
rectangular type with internal graticule 8 x 10 DIV (1 DIV=1
cm) |
| Z - Axis Input |
Sensitivity: Above 5Vp-p
Max Input Voltage: 30V (DC+AC peak)
Bandwidth: DC - 2MHz |
| Phosphor |
P31 |
| Accelerating
Potential |
2 kV |
| Polarity |
Positive-going input decrease |
| Focus Control |
Auto focus |
| Function
Generator |
Frequency Range |
0.1Hz - 1MHz (7 range) |
| Waveform |
Sine Wave, Square Wave, Triangle
Wave |
| Frequency
Variable Range |
10:1 or more |
| Output Impedance |
50Ω±10% |
| Voltage |
Over 14Vpp (open circuit) continuous
conversion
DC offset possible over ±6V when open |
| Sinewave
Distortion |
2% Max. (10Hz - 100kHz) |
| Squarewave Asymmetry |
±3% or less (in 1kHz maximum) |
| Squarewave
Rise/Fall Time |
50Ω output:120nS or less |
| Vertical
System |
Sensitivity |
5mV - 5V/DIV ± 3%, 1mV - 1V/DIV±5%
(using X 5MAG) |
| Bandwidth |
DC to 20MHz (X 5MAG:DC to 7MHz) |
| Rise
Time |
17.5nS
(50nS at X 5MAG) |
| Max Input |
300V (DC+AC peak) at 1kHz |
| Input
Impedance |
Approx. 1MΩ / 25pF |
| Input
Coupling |
AC, DC,
GND |
| Vertical Mode |
CH1, CH2,
DUAL (ALT/CHOP), ADD, CH2 INV |
| Horizontal
System |
Sweep
Time |
0.2µS / DIV - 0.5S / DIV±3%, (±5%
at X 10MAG) |
| Max Sweep Rate |
100nS / DIV (20nS and 50nS / DIV are
uncalibrated) |
| Trigger |
Trigger Mode |
AUTO, NORM, TV-V, TV-H |
| Trigger Source |
CH1, CH2, ALT, LINE, EXT |
| Trigger Slope |
"+" or "-" |
| X -
Y Operation |
Sensitivity |
5mV - 5V / DIV±4% |
| X-axis Bandwidth |
DC - 500kHz |
| Phase Error |
3º or less from DC - 50kHz |
| Output
Signal |
Trigger Signal
Output |
Voltage: 20mV/DIV into 50Ω
Bandwidth: 50Hz to 5MHz (-3dB)
Impedance: 50Ω |
| Calibrator
Output |
1kHz Squarewave, 2Vpp±2% |
| Power Source |
AC 115V/230V ± 10%,
50/60Hz |
| Accessories |
Power cord, manual,
probes(10:1/1:1) X 2 |
| Size |
12.2"(W) X
5.9"(H) X 17.9"(D) |
| Weight |
18.7 lbs. |