 |
GOS-620 20 MHz Dual Trace |
$369.00
* High sensitivity 1 mV/DIV
* TV synchronization
* ALT triggering Function
* Z-axis input
* CH1 output
* Two years factory warranty
* Most economical dual trace oscilloscope
This is the most economical dual trace scope. Best for school training.
| CRT | Type | 6-inch rectangular type with internal graticule 8 x 10 DIV (1 DIV=1 cm) |
| Z - Axis Input | Input
Impedance: 47kΩ Sensitivity: Above 5Vp-p Bandwidth: DC - 2MHz |
|
| Vertical System | Sensitivity | 5mV - 5V/DIV ± 3%, X 5MAG±5% |
| Bandwidth | DC (AC
10Hz) - 20MHz (-3dB) DC (AC 10Hz) - 7MHz (-3dB) X 5MAG |
|
| Rise Time | 17.5nS (50nS at X 5MAG) | |
| Input Impedance | Approx. 1MΩ | |
| Input Coupling | AC, DC, GND | |
| Vertical Mode | CH1, CH2, DUAL (ALT/CHOP), ADD, CH2 INV | |
| Horizontal System | Sweep Time | 0.2µS - 0.5S/DIV ± 3% 100nS - 50mS/DIV±5% (X 10MAG) 20nS - 50nS/DIV: uncalibrated |
| Trigger | Trigger Mode | AUTO, NORM, TV-V, TV-H |
| Trigger Source | CH1, CH2, ALT, LINE, EXT | |
| Trigger Coupling | AC | |
| Trigger Slope | "+" or "-" | |
| X - Y Operation | Sensitivity | 5mV - 5V / DIV±4% |
| X-axis Bandwidth | DC - 500kHz | |
| Phase Error | 3º or less from DC - 50kHz | |
| Output Signal | Trigger Signal Output | Voltage: 20mV/DIV into 50Ω |
| Calibrator Output | 1kHz Squarewave, 2Vpp±2% | |
| Power Source | AC 115V/230V ± 10%, 50/60Hz | |
| Accessories | Power cord, manual, probes(10:1/1:1) X 2 | |
| Size | 12.2"(W) X 5.9"(H) X 17.9"(D) | |
| Weight | 17.6 lbs. | |