GFG-8217A
3 MHz Sweep Function Generator + Counter

$267.00

* Frequency Range: 0.3Hz to 3MHz
* Waveforms: Sine, Triangle, Square, Ramp, TTL and CMOS output
* External Voltage Controlled Frequency (VCF) function
* Duty cycle control with signal inversion capability
* Variable DC offset control
* Two-step (-20dBx2) and variable attenuator
* Built-in 6 digit high resolution counter with INT/EXT function up to 150MHz
* LIN/LOG Sweep Mode
Main Frequency Range 0.3Hz - 3MHz(7 Ranges)
Amplitude >10Vp-p (into 50Ω load)
Impedance 50Ω ±10%
Attenuator -20dB ±1.0dB X2, continuously variable
DC Offset ±10V(±5V into 50Ω load)
Duty Control 80%: 20%: 80% to 1MHz continuously variable
Display 6 digit LED display
Sine Wave  Distortion 1%, 0.3Hz - 200kHz
Flatness <0.3dB, 0.3Hz - 300kHz; <0.5dB, 300kHz - 3MHz
Square Wave  Symmetry ±2%, 0.3Hz - 100kHz
Rise or Fall Time ≤ 100nS at maximum output (into 50Ω load)
Triangle Wave  Linearity ≥98% 0.3Hz - 100kHz;  ≥95%, 100kHz - 3MHz
CMOS Output
Level ≤4Vpp - 14.5Vpp±0.5Vpp adjustable
Rise or Fall Time ≤120ns
TTL Output Level ≥ 3Vp-p
Fan Out 20 TTL Load
Rise or Fall Time ≤25ns
VCF  Input Voltage 0 - 10V ±1V for 100:1 frequency ratio
Input Impedance 10kΩ±10%
Sweep Operation Sweep/Manual Switch selector
Sweep/Rate 100:1 ratio max. and adjustable
Sweep/Time 0.5 sec. - 30 sec. adjustable
Sweep/Mode Lin./Log. switch selector
Frequency Counter Int./Ext. Switch selector
Range 0.3Hz - 3MHz (5Hz - 150MHz EXT.)
Accuracy Time base accuracy ±1 count
Time Base ±10ppm(23°C ±5°C) after 30 min. warm up
Resolution 100nHz for 1 Hz, 1Hz for 100MHz
Input Impedance 1MΩ/150pF
Sensitivity ≤35mVrms(5Hz - 100MHz); ≤45mVrms(100MHz - 150MHz)
Power 115/230 VAC ±15%, 50/60Hz
Size 9.9" W X 11.5" D X 3.6" H
Weight 4.9 lbs.
Accessories BNC-alligator lead (GTL-101) X 2, manual, power cord

Official Instek GFG-8217A Page

Instek Function Generators Comparison Table