 |
GFG-8210 |
| 10 MHz Sweep Function Generator + Counter |
$327.00
* Waveforms: Sine, Triangle, Square, Ramp, TTL and CMOS output
* External Voltage Controlled Frequency (VCF) function
* Duty cycle control with signal inversion capability
* Variable DC offset control
* Two-step (-20dBx2) and variable attenuator
* Built-in 6 digit high resolution counter with INT/EXT function up to 150MHz
* LIN/LOG Sweep Mode
* Sweep Output
| Main | Frequency Range | 0.1Hz - 10MHz(8 Ranges) |
| Amplitude | >10Vp-p (into 50Ω load) | |
| Impedance | 50Ω ±10% | |
| Attenuator | -20dB ±1.0dB X2, continuously variable | |
| DC Offset | ±10V(±5V into 50Ω load) | |
| Duty Control | 15%: 85%: 15% to 1MHz continuously variable | |
| Display | 6 digit LED display | |
| Sine Wave | Distortion | 1% typical |
| Flatness | ±0.45dB(±5%) | |
| Square Wave | Symmetry | ±2%, 1Hz - 100kHz |
| Rise or Fall Time | ≤35ns at maximum output (into 50Ω load) | |
| Triangle Wave | Linearity | ≥98% to 100kHz |
| CMOS Output | Max. Frequency | 2 MHz |
| Level | ≤4Vpp - 14.5Vpp±0.5Vpp adjustable | |
| Rise or Fall Time | ≤120ns | |
| TTL Output | Level | ≥ 3Vp-p |
| Rise or Fall Time | ≤20ns | |
| VCF | Input Voltage | 0 - 10V ±1V for 100:1 frequency ratio |
| Input Impedance | 10kΩ±10% | |
| GCV | Output Voltage | To set the voltage between 0V - 2V as per different frequency |
| Sweep Operation | Sweep/Manual | Switch selector |
| Sweep/Rate | 100:1 ratio max. and adjustable | |
| Sweep/Time | 0.5 sec. - 30 sec. adjustable | |
| Sweep/Mode | Lin./Log. switch selector | |
| Sweep/Out | 0V - 10V±1V | |
| Frequency Counter | Int./Ext. | Switch selector |
| Range | 0.1Hz - 10MHz (5Hz - 150MHz EXT.) | |
| Accuracy | Time base accuracy ±1 count | |
| Time Base | ±10ppm(23°C ±5°C) after 30 min. warm up | |
| Resolution | 100nHz for 1 Hz, 1Hz for 100MHz | |
| Input Impedance | 1MΩ/150pF | |
| Sensitivity | ≤35mVrms(5Hz - 100MHz); ≤45mVrms(100MHz - 150MHz) | |
| Power | 115/230 VAC ±15%, 50/60Hz | |
| Size | 9.9" W X 11.5" D X 3.6" H | |
| Weight | 4.9 lbs. | |
| Accessories | BNC-alligator lead (GTL-101) X 2, manual, power cord | |