GDS-820/840 Series Digital Storage Oscilloscope
	* 150MHz/250MHz Bandwidth with either Color or Monochrome LCD Display * 125k Long Memory and 12 Division Horizontal Display * 25Gsa/s Sampling Rate for Repetitive Waveforms * 15 Auto Measurement Functions to get quick and accurate results * Advance Trigger: Pulse Width, TV-Line, Event Delay and Time Delay * GO-No Go, Learn Mode and Auto Setup Sequence * FFT Function * Standard Interface: USB, RS232, Printer Port * GPIB Interface (Optional $240)
Model GDS-820 $816.00 GDS-820S $985.50 GDS-820C $1165.50 GDS-840S $1308.00 GDS-840C $1705.50 Display System Display Device Mono (320*240) 5.7" LCD Color (320*240) 5.7" LCD Mono (320*240) 5.7" LCD Color (320*240) 5.7" LCD Display Contrast Adjustable Waveform Display Graticule 8 x 10 divisions (8 x 12 div, when menu off) Display Mode Dot, Vector, Accumulate Vertical System Bandwidth (-3dB) DC~150MHz DC~250MHz Channels 2 Resolution 8 bit Sensitivity 2mV/DIV ~ 5V/DIV Accuracy ±3% Rise Time <2.3ns <1.4ns Input Coupling AC, DC, GND Input Impedance 1MΩ ± 2%, ~22pF Polarity Positive& Negative Maximum Voltage Between Signal and Common at input BNC 300V (DC + AC peak), CAT II Waveform Signal Process CH1-CH2, CH1+CH2, FFT Offset Range 2mV/div ~ 50mV/div: ±0.5V 100mV/div ~ 500mV/div: ±5V 1V/div ~ 5V/div: ±50V Bandwidth Limit 20MHz (-3dB) Horizontal System Range 1nS/DIV ~10S / DIV Roll: 250mS/DIV ~ 10S/DIV (1-2-5 increments) Modes MAIN, WINDOW, WINDOW ZOOM, ROLL, X-Y Accuracy ±0.01% Delay Range Pre-trigger: 20 DIV Post-trigger: 1000 DIV Signal Acquisition System Real-time Sample Rate 100MSa/s maximum on each channel Equivalent Sample Rate 25GSa/s maximum on each channel Record Length 125k / CH Peak Detection 10nS (500nS/DIV ~ 10S/DIV) Acquisition Mode Sample, Peak Detect, Average Average 2, 4, 8, 16, 32, 64, 128, 256 Trigger System Source CH1, CH2, LINE, EXT Modes AUTO-LEVEL, AUTO, NORMAL, SINGLE, TV, TIME DELAY, /EVENT DELAY, EDGE, PULSE WIDTH Coupling AC, DC, LF rej, HF rej, Noise rej Sensitivity DC ~ 25MHz: 0.35 DIV or 3.5mV 25MHz ~ 100MHz: 1.5 DIV or 15mV DC ~ 25MHz: 0.35 DIV or 3.5mV 25MHz ~ 250MHz: 1.5 DIV or 10mV External Trigger Range ±15V Sensitivity DC ~ 30MHz: 50mV 30MHz ~ 100MHz: 100mV DC ~ 30MHz: 50mV 30MHz ~ 100MHz: 100mV 100MHz ~ 250MHz: 150mV Input Impedance 1MΩ ± 2%, ~22pF Maximum Input 300V (DC + AC peak), CAT II X-Y Mode X-Axis Input / Y-Axis Input Channel 1 (CH1) / Channel 2 (CH2) Phase Shift ±3° at 100kHz Cursor & Measurement Automated Voltage Measurement Vhi, Vlo, Vmax, Vmin, Vpp, Vavg, Vrms, Vamp Automated Time Measurement Rise Time, Fall Time, Duty Cycle, Frequency, Period, Positive Width, Negative Width Cursor Measurement Voltage difference between cursors (ΔV) time difference between cursors (ΔT) Frequency difference between cursors (1/ΔT) Frequency Counter Readout Resolution 6 digits Range AC Coupled, 10Hz minimum to rated bandwidth Signal Source All available trigger source except the Pulse Width & Video Trigger mode Control Panel Functions Autoset "Autoset" adjust vertical (volt/DIV), horizontal (sec/DIV), and trigger level automatically Save/Recall Up to 15 sets of measurement conditions can be saved and recalled Waveform Trace Save/Recall 2 sets of waveform can be saved and recalled Interface USB Interface N/A Standard RS-232 Interface Printer port Go-No Go Output GPIB Interface Optional Power Source Line Voltage Range 100V ~ 240V AC, automatic selection Line Frequency 48Hz ~ 63Hz Power Consumption 85Watts, 95VA maximum, with fan Accessories Power cord, Instruction manual,  GDS-820 Series: GTP-150A Probes(10:1/1:1) x 2 GDS-840 Series: GTP-250A Probes(10:1/1:1) x 2 Dimensions 10.00"W X 5.59"H X 12.20"D Weight 9.04 lbs

Official Instek GDS-820/840 Digital Storage Oscilloscope Page