Graphical Multimeter
* Dual display for primary and secondary measurements such as voltage with frequency
* Waveform display on full screen with automatically set voltage, timebase, trigger levels and position
* Analog NeedleGraph displays instant, easy-to-read pictures of dynamic signals
* Single shot capability for viewing/capturing non-repetitive waveforms
* TrendGraph plots meter readings in 1 to 15 minutes intervals to monitor the setup for up to 30 hours
* In-circuit Component Test
* Logic Test shows high frequency digital activity to 10MHz
* Highest accuracy among handheld multimeters, 0.025% basic accuracy
* 32,000 count high resolution
* True RMS and averaging responding AC modes selectable to detect harmonics
* Capture 1µs spikes, power sags and surges
* ACV, DCV, ACA, DCA, ohm, conductance, continuity beeper, capacitance, frequency, duty cycle, pulse width, period and dB measurements
* Auto Diode function, relative, peak hold, TouchHold, Min/Max/Ave with time stamp, auto or manual ranging smoothing
Basic DCV Accuracy |
0.025% |
| Measure AC/DC Voltage & mV DC | Yes |
| Measure AC/DC Current to 10 Amps | Yes |
| 30 mA DC Accuracy | 0.05%±15 Counts |
| Current Range | 6 |
| Frequency Counter Range | >10 MHz |
| True RMS AC Bandwidth | 300 kHz |
| Waveform Display Bandwidth | 1 MHz |
| Resistance / Conductance / Continuity | Yes |
| Capacitance | Yes |
| Frequency, Duty Cycle and Period | Yes |
| dB with 16 Selectable Reference Impedances | Yes |
| Logic Activity | Yes |
| Component Test | Yes |
| LCD Backlight | Yes |
| Waveform Memory | Yes |
| TL70A Test Leads | Yes |
| TL20 Test Leads | Yes |
| Battery Eliminator | Yes |
| Optically Isolated RS 232 Cable and Adapters | Yes |
| FlukeView 860 Software | Yes |
| Optional Accessories | C789 Carrying Case BP7217 NiCd Battery Pack BC7210 Battery Charger P/N 943118, 11A 1000V Fuse P/N 943121, 0.44A 1000V Fuse BE860 100 Battery Eliminator BE860 120 Battery Eliminator BE860 230 Battery Eliminator BE860 240AN Battery Eliminator |