| Fluke 70-III | $119.00 |
| Fluke 73-III | $139.00 |
| Fluke 75-III | $169.00 |
| Fluke 77-III | $189.00 |
| Fluke 79-III True RMS | $205.00 |
| Fluke 26-III True RMS | $239.00 |
All Models Feature
* Auto and manual ranging and automatic polarity selection
* Analog bar graph
* Automatic Touch Hold captures stable readings
* Battery-saving Sleep Mode Powers-down display if you forget
* All inputs protected (Including 10A)
* Dark gray case. Fluke 26 is yellow
Standard Equipment:
* Test Leads
* 9V battery installed
* Manual and operator guide
* Lifetime factory warranty
New Fluke 79-III / 26-III Features
* True RMS AC/DC voltage measurements
* Frequency measurements from 0.01 Hz resolution to over 20 kHz
* Capacitance check from 10pF to 10,000 m F
* Lo-Ohms range provides high resolution and increased noise rejection for
low resistance measurements
* High resolution analog bar graph with 63 segments updated 40
times/second
* Smoothing provides stable readings when measuring a variable signal
New Fluke
26-III Features
* Premium electrician’s test lead set TL-24, TP1 &
AC85A alligator
Options:
* Rubber holster $16.00 (for 70-III and 73-III)
* DC/AC Current Probe CA-1000D to measure current
| Specifications | Model |
|||||
70-III |
73-III |
75-III |
77-III |
79-III |
26-III |
|
| Added Features | Basic | DCA, ACA |
DCmA, ACmA |
1000V |
Frequency, Capacitance, Lo-Ohms, Smoothing |
|
| Display | 3,200 counts, updates 2.5 per sec. |
4,000 counts, updates 4 / sec. |
||||
| Bar Graph | 31 segments, updates 25 per sec. |
63 segment, updates 40 / sec. |
||||
| DCV | 320.0 mV, 3.2V, 32V, 320V, 1,000V (0.3% +1) | 320.0mV, 3.2 V, 32V, 320V, 600V (0.3% +1) |
320.0mV, 3.2 V, 32V, 320V, 1,000V (0.3% +1) |
40.00mV, 400mV, 4V, 40V, 400V, 1,000V (0.3% +1) |
||
| ACV | 3.200V, 32V, 320V, 750V (2%) |
3.200V, 32V, 320V, 600V (2%) |
3.200V, 32V, 320V, 1000V (2%) |
400.0mV, 4V, 40V, 400V, 1000V (1.5% + 2dgts) |
||
| Ohms | 320.0Ω, 3.2kΩ, 32kΩ, 320kΩ, 3.2MΩ, 32MΩ (0.5% + 1 dgt) |
400.0Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ (0.4% + 1 dgt) | ||||
| Lo-Ohms | N/A |
40Ω |
||||
| DCA | N/A |
10 A (1.5%+2 dgts) | 32.00mA, 320 mA, 10 A (1.5%+2 dgts) | 4.000mA, 40mA, 4A, 10A (0.5%+2 dgts) | ||
| ACA | N/A |
10 A (2.5%+2 dgts) | 32.00mA, 320 mA, 10A (2.5%+2 dgts) | 4.000mA, 40mA, 4A, 10A (1.5%+2 dgts) | ||
| Frequency | N/A |
100.00 Hz, 1kHz, 10kHz, 20kHz (0.01%+1 dgt) | ||||
| Capacitance | N/A |
100.00nF, 1µF, 10µF, 100µF, 1,000µF, 10,000µF (1.9%+2 dgts) | ||||
| Diode Test | 2.0 V |
2.45 V |
||||
| Continuity Beeper | 150Ω |
30Ω |
||||
| Smoothing | N/A |
Display average of last 8 readings |
||||
| Input Impedance | 10 MΩ |
|||||
| Overload Protection | 500V DC or AC RMS |
|||||
| Size | 1.12" H x 2.95" W x 6.55" L |
1.5" H x 3.5"-3.1" W x 6.55" L |
||||
| Weight | 12 oz |
12.9 oz |
||||
| Power | 9V alkaline, 2000 hours |
9V alkaline, 700 hours |
||||
| Holster/Flex-Stand | OPTIONAL $16.00 |
YES |
||||