| Scope Mode |
| ·
100 MHz
dual-trace DSO |
| · Continuous
Autoset to select the proper time base, input |
| range and trigger level |
| · MIN/MAX
Envelope Mode record the waveform |
| excursions with a gray scale
envelope on both inputs |
| · 40 ns Glitch
Detect for sweep speeds 1m s/div or slower |
| on input A |
| · Analog-like
gray-scale display |
| · Waveform
Average smoothing up to 256 waveforms, 10 |
| samples in Roll Mode |
| · Vertical
resolution 8 bit (256 levels), 1mV/div |
| · Record length
256 or 512 samples (10 or 20 divisions) |
| · Delay trigger
by 1 to 1023 events after external trigger |
| · Cursor
measurements up to 5 displayed simultaneously |
| · Zoom
magnifies waveform around the 4th division at the |
| next sweep |
| · Memory to
save setups, waveforms and screen |
| · Direct
connect to a PC or printer |
| |
| Meter Mode |
| · Displays up
to 4 readings and a full screen width scope |
| waveform of input A |
| · TrendPlot
with date and time stamp to record mins. Hrs. |
| or days of measurements |
| · DCV, ACV true
RMS, Ohm, diode test, frequency 1 Hz to 5 |
| MHz, RPM, duty cycle,
pulse width, dBV, dBm, dBW or |
| audio/RF watts |
| · Data smooth,
fast update, change alert, TouchHold, |
| relative, % change and % scale |
| |
| General Specification |
| · Display:
84x84mm(4.7" diagonal), 240x240 pixels with |
| back light |
| ·
Power: 4.8V NiCad battery, 4 hours operating time |
| · Memory
back-up battery CR2032 for 3 years |
| · Size:
10.2"Lx5.5"Wx2.5"D |
| · Weight:
4.0lb with holster |
