| Scope Mode |
| · 60 MHz dual-trace DSO |
| · Continuous Autoset to
select the proper time base, |
| input range and trigger level |
| · MIN/MAX Envelope Mode
record the waveform |
| excursions with a gray scale
envelope on both inputs |
| · 40 ns Glitch Detect for
sweep speeds 1m s/div or |
| slower on input A |
| · Analog-like gray-scale
display |
| · Waveform Average
smoothing up to 256 waveforms, |
| 10 samples in Roll Mode |
| · Vertical resolution 8 bit
(256 levels), 1mV/div |
| · Record length 256 or 512
samples (10 or 20 divisions) |
| · Delay trigger by 1 to
1023 events after external trigger |
| · Zoom magnifies waveform
around the 4th division at |
| the next sweep |
| · Memory to save setups,
waveforms and screen |
| · Direct connect to a PC or
printer |
| |
| Meter Mode |
| · Displays up to 4 readings
and a full screen width |
| scope waveform of input A |
| · TrendPlot with date and
time stamp to record mins. |
| Hrs. or days of measurements |
| · DCV, ACV true RMS, Ohm,
diode test, frequency 1 |
| Hz to 5 MHz, RPM, duty cycle, pulse width,
dBV, dBm, |
| dBW or audio/RF watts |
| · Data smooth, fast update,
change alert, TouchHold, |
| relative, % change and % scale |
| |
| General Specification |
| · Display:
84x84mm(4.7" diagonal), 240x240 pixels with |
| back light |
| · Power: 4.8V
NiCad battery, 4 hours operating time |
| · Memory
back-up battery CR2032 for 3 years |
| · Size:
10.2"Lx5.5"Wx2.5"D |
| · Weight:
4.0lb with holster |
