20MHz DIGITAL STORAGE SCOPE
| Scope Mode |
| · 20MHz dual-trace DSO |
| · Continuous Autoset to select the proper time base, input |
| range and trigger level |
| · MIN/MAX Envelope Mode record the waveform |
| excursions with a gray scale envelope on both inputs |
| · Connect-and-View operation automatically gives fast |
| and rock-stable display in seconds |
| · 40 ns Glitch Detect for sweep speeds 1m s/div or |
| slower on input A |
| · Analog-like gray-scale display |
| · Waveform Average smoothing up to 256 waveforms, 10 |
| samples in Roll Mode |
| · Vertical resolution 8 bit (256 levels), 1mV/div |
| · Record length 256 or 512 samples (10 or 20 divisions) |
| · Delay trigger by 1 to 1023 events after external trigger |
| · Zoom magnifies waveform around the 4th division at the |
| next sweep |
| · Memory to save setups, waveforms and screen |
| · Direct connect to a PC or printer |
| Meter Mode |
| · Displays up to 4 readings and a full screen width scope |
| waveform of input A |
| · TrendPlot with date and time stamp to record mins. Hrs. |
| or days of measurements |
| · DCV, ACV true RMS, Ohm, diode test, frequency 1 Hz to |
| 5 MHz, RPM, duty cycle, pulse width, dBV, dBm, dBW |
| or audio/RF watts |
| · Data smooth, fast update, change alert, TouchHold, |
| relative, % change and % scale |
| General Specification |
| · Display: 84x84mm(4.7" diagonal), 240x240 pixels with |
| back light |
| · Power: 4.8V NiCad battery, 5 hours operating time |
| · Memory back-up battery CR2032 for 3 years |
| · Size: 9"x4.5"x2" |
| · Weight: 2.5 lb |