Automotive Meter
* 3½ Digit, 0.5% basic accuracy
* 12 Functions, 36 Ranges
* Tachometer 500-10,000 RPM
* Dwell Angle 3, 4, 5, 6, 8 cylinders
* Duty Cycle 0.1-100.0%
* Frequency 0.1Hz-20kHz
* Temperature 0˚ -1400˚F,
-20˚ -750˚C
* Used with current and other adapters
This is a very versatile automotive meter and can be used for many different diagnostic works on car and truck. When used with the inductive pick up IP-08 or the photo tacho adapter TA-601 it can check engine RPM. It can also measure the percentage duty cycle for fuel injection while high resolution frequency counter can read the output from MAF sensor and check the air flow. Temperature measurement using different type K probes can check heating, air conditioning, coolant, exhaust and engine head temperature. When used with the DC/AC current probe CA-1000D it can measure current from battery and alternator up to 1000 Amp. Light adapter LX-02 can be used to check light intensity and anemometer adapter AM 402 can be used to check the wind speed. It is a perfect tool for auto mechanics. Comes with leads and manual.
| DCV | 200.0mV, 2V, 20V, 200V, 1000V |
| ACV | 200.0mV, 2V, 20V, 200V, 750V |
| DCA / ACA | 10.00A |
| Resistance | 200.0Ω, 2k, 20k, 200k, 2000k, 20MΩ |
| Tachometer | 500-10,000RPM; 10RPM resolution |
| Dwell Angle | 3, 4, 5, 6 & 8 cylinder engines; 0.1˚ resolution |
| Duty Cycle | 0-100.0% |
| Frequency | 200.0 Hz, 2k, 20kHz |
| Temperature | -20˚ to 750˚C, 0˚ to 1400˚F |
| Diode Check | Yes |
| Continuity Beeper | Yes |
| Input Impedance | 10MΩ |
| Compatible With | ||
| IP-07 | Inductive Pickup | $14.95 |
| CA-1000D | DC/AC Current adapter up to 1000 amps | $79.95 |
| TP-KO1 | Bead Probe to check air temperature, heating, air conditioning | $8.00 |
| TP-KO2 | Immersion Probe to check exhaust and coolant temperature | $35.00 |
| TP-KO3 | Surface Probe to check engine head, brake and tire temperature | $55.00 |
| LX-02 | Light adapter to check high/low beam | $49.95 |
| AM-402 | Anemometer adapter to check wind speed | $89.95 |