APS Series
AC Power Source

APS-9301 / 9501

APS-9102
* True RMS Meter
* Wide Range Variable Output Output Voltage / Frequency
* 4 sets of "Save/Recall" Voltage/Frequency Memory
* Stable and Low-Distortion Output Waveforms
* Software Calibration
* Panel-Lock Function to Prevent Accidental Wrong-Operation
* Over Current Protect and Over Tempperature Protect
* Frq., Volts, Amps, Watts and P.F. Display
MODEL APS-9301 APS-9501 APS-9102
Price $1009.80 $1188.00 $1894.00
Output Voltage 0.0 ~ 300.0VAC, 0.1V/step (110V/220V selectable)
Current 0~150V, 2.6Arms
0~300V 1.3Arms
0~150V, 4.2Arms
0~300V 2.1Arms
0~150V, 8.4Arms
0~300V 4.2Arms
Capacity 300VA 500VA 1000VA
Regulation Line Voltage ≤0.1%
Load ±(0.5% + 0.1V)
Measurement Frequency Counter Range: 0.0~999.9Hz ; Resolution: 0.1Hz ; Accuracy: ±0.1Hz
RMS Volt-Meter Range: 0.0~380.0V ; Resolution: 0.1V ; Accuracy: ±(1%rdg + 0.1V)
RMS Amp-Meter Range: 0.000~2.000A ; Resolution: 1.0mA ; Accuracy: ±(1%rdg + 5mA)
Range: 1.80~35.00A ; Resolution: 0.01mA ; Accuracy: ±(1%rdg + 20mA)
Wattage Meter Range: 0.0~360.0W ; Resolution: 0.1W; Accuracy: ±(1.5%rdg + 0.5W)
Range: 320.0~3500.0W ; Resolution: 1.0W; Accuracy: ±(1.5%rdg + 1W)
Power Factor Meter Range: 0.000~1.000 ; Resolution: 0.001; Accuracy: ±(2%rdg + 0.002)
Frequency 45.0~500.0Hz (50Hz/60Hz selectable)
0.1Hz/step (45.0Hz~100.0Hz), 1Hz/step (100.0Hz~500.0HZ)
Waveform Sine wave, ≤0.5% TDH (Resistance Load)
Save / Recall 4 settings, Save/Recall operated by hand
Protection Short-Circuit protection, Panel-lock
Over-High Temperature protection, Current Overflow
Power Source AC 115V/230V±15%, 47 ~ 63Hz, Single phase
Operation Temperature / Humidity 0°C ~ +10°C ; <80% (non-concreting)
Dimensions 16.9"W X 5.4"H X 19.7"D 16.9"W X 8.9"H X 19.7"D
Weight 44.1 lbs. 55.1 lbs. 77.2 lbs.

Official Instek APS Power Source Page